Yamaha CRW2200SX CD Player User Manual


 
iii
Remove dust and dirt from the AC power plug regularly, especially the blades.
Otherwise, dust can build up on the surface of the plug, increasing the risk of fire or insulation failure
due to humidity.
When disconnecting, do not pull on the cord itself.
Do not let objects rest on or roll over the cord.
Otherwise, the cord could be damaged and cause electric shock or fire.
Insert the plug of the AC adapter firmly.
If the plug is not fully inserted, it can generate heat and may cause electric shock or fire.
Be sure to use only the included AC adapter.
Otherwise, a malfunction or fire could occur.
Do not use voltage exceeding the rating of this device.
If too much electricity is drained from one plug (e.g., if too many appliances are plugged into the
same socket), it may generate heat and cause fire.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to
yourself or others, or damage to the instrument or other property. These precautions include, but
are not limited to, the following:
Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of
time, or if there is a risk of lightning.
Otherwise, there is an increased risk of electrical shock, short-circuiting, or fire.
Do not expose the device to excessive heat or vibrations, such as in areas subject to direct sunlight
or near a heater.
Also avoid placing it in extreme cold or in areas subject to excessive dust.
Otherwise, the front panel may become disfigured or the internal components may be damaged.
Do not use the device near other electrical products such as televisions, radios, or speakers.
Otherwise, this may cause interference which can affect the proper operation of those other
products.
Do not place the device in an unstable position.
Otherwise, it may accidentally fall down and be damaged or cause personal injury.
Mount the device horizontally.
Otherwise, written data may be destroyed. Set the device up according to the instructions in the
Owner’s Manual.
Always remove the disc from the disc tray before transporting the device.
Otherwise, written data may be destroyed.
When cleaning the device, never use benzene, paint thinners, detergents, or chemically coated
wiping cloths. Also, do not place vinyl, plastic, or rubber objects on the device.
Otherwise, the device may be damaged or its front panel may become discolored. Use a soft, dry
cloth to wipe the device.