Filter
Top Products
Setup Procedures
16
Connecting the AC Adapter
1
11
1 Connect the included AC adapter to the DC-IN connector of the drive
with the arrow on the adapter plug facing left, as shown below.
2
22
2 Connect the included power cable to the AC adapter (
➀
➀➀
➀
).
Connect the other end of the power cable to the AC outlet (
➁
➁➁
➁
).
Electrical plugs/sockets vary according to country/region.
Notes
• Operate the drive only with the included AC adapter.
• The bottom of the drive and the AC adapter become warm during use.
This is not a malfunction.
• Only by connecting the includedAC adapter to a AC outlet, the electric power shown in the
table below is consumed. Always unplug the AC adapter from the AC outlet when you do
not intend to use the drive for a long time.
AC adapter (model) Power source Power consumption
SKB2505A 100 V 2.1 W
120V 2.4W
SMB2505A 220 – 240 V 1.4 W
Arrow
DC-IN
connector
Screw
➁
➀