Filter
Top Products
10
LINE IN — LINE OUT IN OUT
DIGITAL
REC COAXIAL OPTICAL COAXIAL OPTICAL
RS–232C
VIDEO
VIDEO
OUT
S VIDEO
ANALOG
PLAY
R
L
R
L
4 3
REC
PLAY
OUT
IN
DIGITAL
INPUT
COAXIAL
DIGITAL
OUTPUT
R
L
R
L
OPTICAL
OPTICAL
DIGITAL
OUTPUT
COAXIAL
VIDEO IN
S VIDEO
VIDEO
Coaxial cable
(optional)
To wall outlet
S-video cable
(optional)
Video pin cable
(included)
*RS-232C terminal
Optical cable
(one included)
Coaxial cable
(optional)
Amplifier or receiver
Audio pin cable
(included)
Audio pin cable
(included)
(U.S.A. model)
Turn off the power of this unit and the other components, and unplug them from the wall outlet before making any connections. Follow the
diagram below to make connections with proper cables.
Digital connections
•To output signals from this unit to an external component, connect DIGITAL OUT jack of this unit to the digital input jack of the external
component. To input signals from an external component to this unit, connect DIGITAL IN jack of this unit to the digital output jack of the
external component.
• This unit cannot input digital signals other than PCM signals.
Analog connections
•To output signals from this unit to an external component, connect ANALOG LINE OUT jack of this unit to the analog input jack of the
external component. To input signals from an external component to this unit, connect ANALOG LINE IN jack of this unit to the analog
output jack of the external component. Be sure to connect L (left) and R (right) jacks respectively
•To connect the turntable directly to this unit, first connect it to the phono equalizer and then connect to the ANALOG LINE IN (REC) jacks
on this unit.
Memo
•When you play the data on the HDD or CDs, signals are output both from the ANALOG LINE OUT (PLAY) jack and from the DIGITAL
OUT (OPTICAL/COAXIAL) jacks.
• Signals that are output through the DIGITAL OUT (OPTICAL) jacks or the DIGITAL OUT (COAXIAL) jacks while playing the data on
the HDD do not have information about the track markers. Therefore if these signals are recorded by an MD player, the track markers may
not be placed correctly on the recorded MD disc.
Arrow marks (➞) in the illustration below
indicate the direction of signals.
CONNECTIONS
* This terminal is for connection of the personal computer. Information about the connection software is to be announced on the
YAMAHA Website (http://www.yamaha.co.jp/english/product/av/).
DVD player, cable TV tuner, etc
Monitor
101_HD1500(E)01-11.p65 3/22/05, 14:4710