Filter
Top Products
Chapter 2 - Installing the Yamaha CDR400At Drive
11
9. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply
interface located on the rear panel of the CDR400At drive.
The shape of the connector makes it impossible to reverse the connections.
If you have difficulty when inserting the connector, try wiggling the con-
nector left and right while inserting it.
10. Tighten the four fastening screws securely.
R G L
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
AUDIO OUT
VZ49880-0
1 +5V G +12V
VZ49880-0
SCSI
INTERFACE
CONNECTOR DC INPUT