Filter
Top Products
vehicle installation
11
Vehicle installation
Every vehicle is different; for your safety, follow all instructions carefully. Consult a
professional installer if you have questions.
1. To begin, first decide which method of installation is best for your vehicle:
XM SureConnect (Sold Separately): You can listen to your Xpress
EZ
through your car
stereo by using Xpress
EZ
’s built-in FM modulator and the XM SureConnect. Simply find
an unused FM frequency on the stereo and set your Xpress
EZ
to transmit on that same
frequency.
FM Direct Adapter (Sold Separately): If you choose to use the FM Direct Adapter to
transmit XM audio through your car stereo, we recommend professional installation.
Cassette Adapter (Sold Separately): Use the cassette adapter if your vehicle’s audio
system has a built in cassette player.The cassette adapter will provide the best audio
quality.
Audio input: Some vehicles come with an audio input jack. If your vehicle has this
type of input you can simply use a mini audio cable (sold separately).
Note: Separate purchase of one of the above accessories is required in order to install
your XpressEZ
2. Once you have chosen your method of installation, next you can mount your
Xpress
EZ
.
3. Next decide the best location for your XM antenna. Mount this antenna to the
roof or trunk of the vehicle. During installation, make sure you are outdoors and the
antenna is not obstructed by tall buildings.
4. Finally you will connect all of the plugs to the car cradle and dock your Xpress
EZ
into
the cradle. Once in place you can activate your Xpress
EZ
.
Now that you have all of the parts you need, you are ready to begin installing your
Xpress
EZ
.