Filter
Top Products
Model MRC88m / MRAUDIO8x8m Page: 85
© 2009 Xantech Corporation
2. Press the button for the zone to be unlinked. (Z1, Z2, etc) The keypad status LED’s will show ‘busy’
(rapid amber flash) for 10 seconds after the last button press, then ‘time out’ and return to normal
use mode (LED /green, LCD/normal display). The small ‘L’ will no longer appear. The zones will
resume independent control.
(EXPANDED)
Same as above, using the Status button in “Link Session” to access zones 9-16.