VocoPro The Bravo Digital CDG and Cassette Karaoke Player Cassette Player User Manual


 
Unpacking The Bravo
Carefully remove The Bravo from its carton before discarding the packaging materials. If it should become necessary to return the unit for
any reason the original packaging materials are best suited for transporting the unit to minimize any potential damage.
BE SURE YOU HAVE THE PARTS AND COMPONENTS INCLUDED WITH THE BRAVO.
Thank you for purchasing The Bravo. At VocoPro we care about product quality and customer satisfaction.
We know The Bravo will provide years of quality enjoyment and reliable music entertainment for you when
used properly.
BEFORE YOU START
PLEASE READ CAREFULLY BEFORE USING YOUR NEW BRAVO
CONNECTING A TELEVISION MONITOR
If you will be connecting The Bravo to a television monitor use the RCA video connector
wire that is included. On the back of the player, locate the RCA connector jack labeled “VIDEO
OUTPUT”, it is color coded in yellow. Connect either end of the RCA connector wire to the
“VIDEO OUTPUT” jack and the other end to your television monitor. There should be an RCA
connector jack, just like the one on the back of the player, labeled video input. Connecting this
wire will enable your television monitor to display the graphics that are encoded on CDG
Karaoke discs. NOTE: If your television does not have an RCA type connector you may use the
RF Modulator jack on the back of the Bravo.
2
SUPPLYING POWER TO THE BRAVO
IMPORTANT! Be sure all your components i.e., TV monitor, etc.., are
connected to the Bravo BEFORE connecting to a power source and supplying
power to the unit. Be sure to use caution when plugging in any electrical
appliance. The Bravo comes with it’s own standard wall outlet power cord. It is
attached to the back of The Bravo player unit. Plug the power cord into any
wall outlet or surge protector.
CONNECTING A MICROPHONE
1. Using a microphone cable, designed for use with most Karaoke
products, connect a microphone to the end of the cable with the
“XLR” connector (see diagram).
2. Connect the end of the cable with the ¼” connector into either
of the ¼” jacks on the front of The Bravo amplifier player.
QUICK START
¼” jack
IMPORTANT! Before connecting a microphone, be sure the power is off or the volume is turned
all the way down. When the microphone is plugged in and the unit is on do not point the
microphone directly toward the speakers or leave an unattended microphone too close to the
speakers when the volume is up. This can create a loud squeal called “feedback” and could
possibly damage your speakers.
“XLR”
connector
1 VocoPro Bravo CDG & Cassette
Karaoke Player
1 RCA cable for video hookup