Filter
Top Products
RAISING OR LOWERING THE PITCH (OR KEY) OF THE MUSIC
1. To raise the pitch or key of the music press the “sharp” (#) sign once for each ½ step you would like the music raised.
2. To lower the pitch or key of the music press the “flat” (b) sign once for each ½ step you would like the music
lowered.
3. To return the music to its “natural” or “original” key, simply press the “natural” key button once.
NOTE: The digital display will show how many half steps a song is raised or lowered by indicating a (+) or (-) before a number to
indicate raised (+) or lowered (-). It will display (+0) if the current song selection is being played in the natural key.
USING THE CASSETTE DECK TO PLAY OR PLAYBACK
1. Locate the “CASSETTE” button under the CD tray on the front of the unit (See diagram) NOTE: When recording,
this button should be set to “CDG”.
2. Press once to change to cassette mode for playing and recording cassette tapes.
3. Locate the “ST/EJ” button on the front of the cassette deck and press to open cassette door.
4. Insert the cassette tape with the side you want to play facing you and carefully close the cassette door, never force.
5. To rewind the cassette press the ”REW’ button until the tape rewinds to the desired location.
6. To advance the cassette press the “F-FWD” button until the tape advances to the desired location.
7. To stop either function locate the “STOP” button and press once. This will stop advancing, rewinding or playing the
cassette tape.
8. To play the desire selection locate the “PLAY” button and press once.
NOTE: The graphics function will not work with cassette tapes.
CHANGING THE KEY OF THE MUSIC USING THE CASSETTE DECK
Follow the same instructions for changing the key or pitch with the cassette deck as for changing the key for the CD/CDG player.
See: RAISING OR LOWERING THE PITCH (OR KEY) OF THE MUSIC. (ABOVE)
CHANGING THE KEY
(Cont.)
USING THE CASSETTE DECK
5