Filter
Top Products
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE(S)
SOLUTION(S)
No video signal. Words don’t
appear on the TV monitor.
Be sure the television is set
to the “VIDEO” mode (see your
television’s owners manual).
The television may not be
switched to the proper video
input channel.
Be sure the “VIDEO OUTPUT”
jack (See PARTS AND FUNC-
TIONS diagram) on the rear
panel of the CDG X-3 Mark II is
connected to the “VIDEO INPUT”
section of the TV monitor.
Not all televisions/monitors have
“RCA” connector jacks.
Unable to connect the CDG X-3
Mark II to my television monitor
with the “RCA” cable provided.
You will need an “RF Modula-
tor”, or VCR. (See PARTS
AND FUNCTIONS, #17 and
diagram for “CONNECTING A
TELEVISION MONITOR “. There
are three options for connecting
televisions without video input
jacks.
There is a loud “squealing” noise
coming from speakers.
This noise is called “feedback”.
Feedback occurs for various
reasons. For example, feed-
back can occur if the micro-
phone is held too closely to, or
pointed directly at, the speak-
ers . Feedback can also occur
if the microphone volume is
too high or there is too much
treble frequency being used.
Turn down the microphone
volume.
Turn down the treble control.
Hold the microphone away
from the speakers.
11