Filter
Top Products
Version 1/19/2009 9
www.VIZIO.com
REMOTE CONTROL SENSOR – The Remote Sensor is located at the lower right side of the Sound Bar.
This is the window through which all of the remote control signals pass to the sensor. Point the remote
control directly at this window for the best response to the remote signal.
HD Sound Bar
HD Sound Bar HD Sound Bar
HD Sound Bar System
System System
System Remote Control
Remote ControlRemote Control
Remote Control
The VIZIO Remote Control supplied is designed to be used exclusively with this product. The remote
button functions are described below:
1.
Power – Use this button to turn HD Sound Bar System ON or OFF.
2.
Input – Use this button to select the input desired. Repeated
pressing will cycle through Input 1, Input 2 or Optical In.
3.
Vol+ – Pressing this button will increase the volume level.
Hold for one-half second to continuously increase volume.
4.
Vol - – Pressing this button will decrease the volume level.
Hold for one-half second to continuously decrease volume.
5.
Mute – Pressing this button will either mute or un-mute the Sound
Bar/Subwoofer system.
6.
TVOL– Pressing this button will set the sound system to have
control over the level of the audio output, preventing commercials
on regular programming to become louder than the volume of the
program being viewed. Pressing this button will toggle SRS
TruVolume ON and OFF.
7.
TSHD – Pressing this button will toggle SRS TruSurround HD ON
and OFF.
8.
Sub+ – Pressing this button will increase the volume output of the
Subwoofer relative to the overall system volume.
9.
Sub- – Pressing this button will decrease the volume output of the
Subwoofer relative to the overall system volume.
Programming a Universal Remote to
Programming a Universal Remote to Programming a Universal Remote to
Programming a Universal Remote to
operate the
operate theoperate the
operate the
HD Sound Bar System
HD Sound Bar System HD Sound Bar System
HD Sound Bar System
If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program
a device button with code 31517. This will map the Universal Remote button to operate the HD Sound
Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.
Vizio Remote key HD Sound Bar System
Power Power
Input Input
Volume Up Volume Up
Volume Down Volume Down
Mute Mute
Channel Up Sub Volume Up
Channel Down Sub Volume Down
Menu SRS TruSurround
INFO SRS TruVolume