Vizio VSB210WS Speaker System User Manual


 
VIZIO VSB210WS User Manual
2
www.VIZIO.com
Important Safety I
Important Safety IImportant Safety I
Important Safety Instructions
nstructionsnstructions
nstructions
The HD Sound Bar System is designed and manufactured to operate within defined design limits,
and misuse may result in electric shock or fire. To prevent the HD Sound Bar System from being
damaged, the following rules should be observed for its installation, use, and maintenance.
Please Read the following safety instructions before operating the HD Sound Bar System. Keep
these instructions in a safe place for future reference.
To reduce the risk of electric shock or component damage, switch off the power before
connecting other components to the HD Sound Bar System.
Unplug the power cord before cleaning the HD Sound Bar System. A damp cloth is sufficient for
cleaning. Do not use a liquid or a spray cleaner on the HD Sound Bar System. Do not use
abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the HD Sound Bar System from an area of low temperature to an area of high
temperature, condensation may form in the housing. Wait before turning on the HD Sound Bar
System to avoid causing fire, electric shock, or component damage.
A distance of at least 3 feet should be maintained between the HD Sound Bar System and any
heat source, such as a radiator, heater, oven, amplifier etc. Do not install the HD Sound Bar
System close to smoke. Operating the HD Sound Bar System close to smoke or moisture may
cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the HD Sound Bar System and to protect it from overheating, be sure these
openings are not blocked or covered. Do not place the HD Sound Bar System in a bookcase or
cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on the HD Sound Bar System enclosure. Do
not place any objects on the top of the HD Sound Bar System. Doing so could short circuit parts
causing a fire or electric shock. Never spill liquids on the HD Sound Bar System.
The HD Sound Bar System should be operated only from the type of power source indicated on
the label on the AC/DC Adapters. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
Only power of the marked voltage can be used for your HD Sound Bar System. Any other voltage
than the specified voltage may cause fire or electric shock
The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
The HD Sound Bar System AC/DC Adapters are equipped with a three-pronged grounded plug
(a plug with a third grounding pin). This plug will fit only into a grounded power outlet. This is a
safety feature. If your outlet does not accommodate the three-pronged, have an electrician install
the correct outlet, or use an adapter to ground the HD Sound Bar System safely.
Do not defeat the safety purpose of the grounded plug.
When connected to a power outlet, power is always flowing into the HD Sound Bar System. To
totally disconnect power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous
voltage within the inside of the HD Sound Bar System that
may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
accompanying your HD Sound Bar System.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be located near the HD Sound Bar System and be easily accessible.