Filter
Top Products
VIZIO VSB210WS User Manual
10
www.VIZIO.com
Inst
InstInst
Installing
allingalling
alling
the
thethe
the
Batter
BatterBatter
Battery
yy
y
in the Remote Control
in the Remote Controlin the Remote Control
in the Remote Control
Turn the remote control over. Press inward to release the lock (1), and at the same time, slide the battery
holder out of the remote with your fingernail (2).
Insert the supplied CR2025 Lithium Button Battery into the remote control. Make sure that you match the
(+) symbol on the battery with the (+) symbol on the battery holder. Re-insert the battery cover in the
same orientation.
Precautionary Tips for Inserting the Batteries:
Only use the specified battery.
Inserting the battery incorrectly may also result in
damage to the remote control.
Dispose of the battery in accordance with local
laws and regulations.
Keep the battery away from children and pets.
R
RR
Remote Control Range
emote Control Rangeemote Control Range
emote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
VIZIO Remote Control
VIZIO Remote ControlVIZIO Remote Control
VIZIO Remote Control
Precautions
PrecautionsPrecautions
Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the HD Sound Bar System responds erratically to the remote control or does not respond at all, check
the battery. If the battery is low or exhausted, replace it with a fresh battery.
When not using the remote control for a long period of time, remove the batteries.
Do not take the battery apart, heat it, or throw it into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Cleaning the Housing and Remote Control
Cleaning the Housing and Remote ControlCleaning the Housing and Remote Control
Cleaning the Housing and Remote Control
If the housing or remote control is seriously contaminated, use a soft cloth moistened with diluted neutral
cleaner to clean the display. Wring water out of the cloth before cleaning to prevent water from
penetrating into the housing. Wipe with a dry cloth after cleaning.