Filter
Top Products
DLP Projector—User’s Manual
– 11 –
SETUP AND OPERATION
Starting and Shutting down the Projector
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The
POWER LED on the
projector light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED not a
flashing. Then press the
POWER
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lock) on page 13 if
security lock is enabled.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
• VGA: Analog RGB
• Component Video: Traditional component video
• Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
• HDMI 1 / HDMI 2: High-Definition Multimedia
Interface