Filter
Top Products
DLP Projector—User’s Manual
— 8 —
ITEM LABEL DESCRIPTION SEE PAGE
1.
Power OFF Turns the projector off
11
2.
HDMI 2 Displays the HDMI 2 source selection
3.
PC Displays the PC source selection
4.
VIDEO Displays the VIDEO source selection
5.
Up cursor /
Keystone+
Navigates and changes settings in the OSD
Quick Menu – For Keystone
6.
ENTER Enters and confirms settings in the OSD
7.
Right cursor Navigates and changes settings in the OSD
8.
Downp cursor /
Keystone-
Navigates and changes settings in the OSD
Quick Menu – For Keystone
17
9.
ASPECT RATIO Displays the ASPECT RATIO selections
10.
SOURCE Detects the input device
11.
2D f 3D Toggle 3D function
12.
BRIGHT Displays the brightness setting bar
13.
SHARP Displays the sharpness setting bar
14.
COLOR Displays the color setting bar
15.
TINT Displays the tint setting bar
16.
BLANK Makes the screen blank
17.
FREEZE Freezes/unfreezes the on-screen picture
18.
AUTO Auto adjustment for frequency, phase, and position
19.
LIGHT
Turns on or off the remote control backlight for about 10 seconds.
Pressing any other key while the backlight is on keeps the backlight on
for a further 10 seconds.
20.
VOL -
21.
VOL +
Adjusts volume
17
22.
MUTE Mutes the built-in speaker
23.
CONTRAST Displays the contrast settings bar
24.
PICTURE MODE Changes the Display Mode setting
25.
MENU/ EXIT Opens and exits the OSD
26.
Left cursor Navigates and changes settings in the OSD
17
27.
COMP Displays the Component source selection
28.
HDMI 1 Displays the HDMI 1 source selection
29.
Power ON Turns the projector on
11
30.
IR transmitter Transmits signals to projector