Filter
Top Products
48
.
www.velodyne.com
SC-IW Installation Manual
S
tep 11 - Install Drywall Above Filler Plate
A
fter the filler plate is secured to the driver module, install a replacement piece of drywall above
the filler plate in the opening. This drywall should be securely fastened to the studs using
drywall screws.
Step 12 - Tape, Mud, Texture and Paint Wall
After the V
elodyne subwoofer is installed into the wall, the wall should be taped, textured,
blended and then painted to match the existing wall. It is not required to finish the filler plate
as it will be removed in the next step.
Note the grille can also be painted to match the de´cor. The supplied paint masks can be used
to paint the grille frame while the metal grille insert can be painted separately.
Note: The paint cover should be remain on the driver until this step is complete.
Figure 48: Drywall Installation