Filter
Top Products
New Construction Installation — Designer Grille
15
.
www.velodyne.com
SC-IW Installation Manual
N
ote:
T
his installation process assumes that the installer has access to the open framed 2x4
studded wall with 16 inch spacing. (In the event that the stud spacing is larger, an additional
2x4 or other spacer can be used to fill the space between the SC-IW back box and the
neighboring stud.)
Step 1 - Assemble Cabinet and Driver Modules Together
Remove both the back box and driver modules from the packaging and place them on a clean
surface. Place the back box with the two silicon rubber tubes facing upward. Remove the two
clamp rings from the packaging and place them over the tubes.
Note: Leave the paint cover on the driver to pr
event damage during the installation, painting
and finishing process.
Figures 13a and 13b: Cabinet and Driver
Module Assembly