Filter
Top Products
6
.
www.velodyne.com
SC-IW Installation Manual
S
tep 3 - Route Wire
R
oute the wire from the location where the electronics gear is located to where the SC-IW will
be. There is "extra space" between the studs and the back box in the event that the wire has
to pass along the side of the back box to the driver module.
Step 4 - Cover Rubber Couplings
If the installation is not going to be finished right away, Velodyne recommends "taping" or
otherwise “covering” the two connecting tubes to prevent paint, drywall and/or foreign objects
from entering the back box.
Figure 3: Route Wire