Filter
Top Products
35
.
www.velodyne.com
SC-IW Installation Manual
S
tep 11 - Install Drywall Above Filler Plate
A
fter the filler plate is secured to the driver module, install a replacement piece of drywall above
the filler plate in the opening. This drywall should be securely fastened to the studs using
drywall screws.
Step 12 - T
ape, Mud, T
exture and Paint Wall
After the SC--IW is installed into the wall, the wall should be taped, textured, blended and then
painted to match the existing wall. Note the grille can also be painted to match the de´cor.
Note: The paint cover should be remain on the driver until this step is complete.
Figure 34: Drywall Installation