Filter
Top Products
34
PA966/967 User's Manual
Changing Communications Settings
To check communications settings, open the Mobile
Devices folder, and click File / Connection Settings.
The baud rate on the PA966 is set to 57600bps by
default. To adjust the baud rate, tap Start, Settings,
Control Panel, select the Communication icon, select
the PC Connection tab, and then tap the Change
Connection… button.
For more information see Microsoft ActiveSync Help.
If Microsoft ActiveSync fails to detect the PA966 during installation, set up communications manually
instead. Make sure the following conditions are met:
• Verify that the correct communications port is selected for your desktop computer and that it is
free.
• Microsoft ActiveSync uses the specified communication ports to connect to the PA966. Make
sure these resources are available for Microsoft ActiveSync to connect to the PA966. Other
programs cannot use them while the PA966 and your desktop computer are connected.
• Set your baud rate on the PA966 - the desktop computer will match it.
To change the terminal’s default baud rate or to use IrDA to communicate
with the Host PC, follow the steps below to make modifications:
Tap Start, Settings, Control Panel, Communications1.
Tap the PC Connection tab2.
Tap the Change Connection button3.
Select the baud rate from the list box4.