Unitech PA966 Stereo System User Manual


 
21
PA966/967 User's Manual
The contents of the screen will be cleared.
Enable Scan
Tap Menu.
Select Enable Scan.
Press the scanner trigger key.
A laser light will exit from the top of the PA966, and if it encounters a
bar code it should be read (assuming it is a bar code symbology the
PA966 is programmed to recognize).
Auto-Scan
Select Start Auto-Scan (see previous image). Define the interval
between scans. Aim the scanner at the target bar codes, one after the
other.
To stop scanning, select Stop Auto-Scan.
The procedures for 2D scanning are similar to those for 1D scanning,
except that the PA966’s optional 2D imager can also capture images.
Select the Test tab. Tap Menu.
2D Scanning