Filter
Top Products
– 18 –
– 19 –
EN
10) Configuration of the TrekStor MovieStation
To open the configuration mode of the MovieStation, press the "set uP" button.
Re-press the "s
et uP " button to exit the configuration
In this mode, you can undertake audio / video settings (Audio / Video settings)
and general system settings (General settings).
Press the
W or U button to change to the next or previous menu item. To go to
a submenu, press the
V button. To exit a submenu, press the X button. If you
would like to change a setting, press the
A button when the corresponding
menu item is selected.
Audio / Video settings:•
TV mode: Under the menu item "tv
M o d e ", you can select NTSC or PAL as the
color transfer system.
Screen: Under the menu item "s
creen", you can select from 4 presentation
modes (4:3 Letter box, 4:3 Pan&Scan, 16:9 Letterbox, 16:9 Pan&Scan).
TV out: Under the menu item "tv
o ut ", you can set the video output signal
of the MovieStation. You have the choice between a composite video
signal and HDTV video signals of differing qualities.
General settings:•
Language: Under the menu item "l
An gu Age ", you can select the menu
language of the MovieStation.
Skip interval: Under the menu item "s
KiP intervAl", you can select the increment
for the gradual fast-forwarding of videos.
Slide show: Under the menu item "s
l ide sH ow ", you can set how long a picture
is displayed during a slide show.
Factory setup: Under the menu item "f
A ct or y setuP", you can restore the
original settings of the MovieStation. The files saved on your hard disk are
not deleted when you do this.
Firmware update: Under the menu item "f
irMwAre u Pd Ate ", you can update
the MovieStation with the most current firmware from the internet. Please
follow the following steps:
a) Download the firmware (*.zip-file) from the TekStor website www.trekstor.de
and unzip it in the folder of your choice.
b) Copy the unzipped BIN file in the main directory of the MovieStation.
c) Connect the MovieStation with the home entertainment system and
while in configuration mode select the menu item "f
irMwAre u Pd Ate ".
d) Confirm the question "s
tA rt t He firMwAre u Pd At e?" with "yes".
e) Subsequently follow the instructions of the MovieStation.