Filter
Top Products
– 14 –
– 15 –
EN
8) Connecting the TrekStor MovieStation to a
home entertainment system.
Note: You can connect the MovieStation with either the PC or with your home
entertainment system. A simultaneous connection with both systems is not possible.
a) Insert the provided power supply into an electrical outlet, and connect the
cable to the "P
o w e r " connection of the MovieStation.
b) The following connection possibilities are available on your home entertainment
system with the MovieStation:
• AV adapter cable
Use the provided AV adapter cable and connect the AV OUT output of the
MovieStation with the audio / video input of your television set to transmit
the sound and picture signal.
• YUV adapter cable
Use the provided YUV adapter cable and connect the YPbPr Out output of
the MovieStation with the video component input of your television set to
transmit the picture signal. You have the following 2 options for transmitting
the sound signal:
- Connect the optical audio output of the MovieStation with the optical
audio input of your HiFi system.
or
- Connect the stereo jack of the provided audio / video adapter cable with the
AV Out output of the MovieStation and the red or white phono plug with
the audio cinch input of your HiFi system or your television set.
c) Turn on the MovieStation by briefly pressing the on / off switch on the
MovieStation or the power button on the remote control. Hold down the
on / off switch off the MovieStation or briefly press the power button on
the remote control to turn off the MovieStation.
Note: The MovieStation may be in a different video mode even though it is correctly
connected. This can distort the picture and the color displayed on your TV. To
switch modes:
• Brieflypressthedie"TV-O
uT "buttonontheremotecontrolfortheMovieStation.
• RepeatthisprocessuntilthepictureonyourTViscorrect.Thecorrectedsetting
is automatically stored.