Filter
Top Products
17
The NFC function is built into Android
TM
devices powered by Android 4.1
Jellybean or later.
If your device is powered by a previous version than Android 4.1 Jellybean,
you must download the relevant application from Google Play
TM
Store to use
the NFC function.
The position of the NFC antenna differs on devices. Check where the NFC
antenna is located before connecting. If your device is covered with a thick
case, the connection may not succeed.
For details, please refer to the user manual of your NFC device.
Bluetooth
®
connection by NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication
between various devices, such as mobile phones and IC tags.
By just touching the SoundStrip
®
where the “N-mark” is located with an NFC compatible device,
the SoundStrip
®
is turned on automatically and then paired and connected with the various devices,
such as mobile phones. To locate the “N-mark” on the unit, please see page 7.
1. Start and turn on the NFC function on the device. Your Bluetooth must be in active or “ON”
mode from your pairing device. Keep touching the device on the “N-Mark” of the SoundStrip
®
until the device vibrates or a message pops up, the Bluetooth
®
will be paired automatically.
2. Touch the SoundStrip
®
with the device again to disconnect. In order to avoid unintentional
disconnection, it is advised that you place your device away from the “N-mark” once connected.
SBX5065KU_IB_R6.indd 17 2013/7/3 10:01:09