Filter
Top Products
11
Installing the batteries
Install the batteries (AAAx2), matching the polarity indicated inside the battery compartment of
the remote control.
1 Open the battery cover.
2 Insert batteries.
Make sure to match the polarity marks (+ / –) on the batteries to the marks indicated in the
battery compartment.
3 Replace the battery cover.
(Sample Illustration) Remote control
- Opening the battery cover
(Sample Illustration) Remote control
- inserting the batteries
Never throw batteries in a fire. Doing so may cause the batteries to explode.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
Dispose of batteries in a designated disposal area.
Always consider the environment when disposing of batteries.
Always follow applicable laws and regulations.
If the remote does not operate correctly, or if the operating range is reduced,
replace the batteries.
Always replace both batteries with new ones. Never mix battery types or use new
and used batteries together.
Always remove batteries from the remote if they are dead or if the remote control
is not to be used for an extended period of time.
This prevents battery acid from leaking into the battery compartment.
SBX5065KU_IB_R6.indd 11 2013/7/3 10:01:08