Filter
Top Products
20
8. Function Screens
8.1. Parametric Equaliser Screen
All modes feature a total of 30 bands of fully flexible parametric equalisation (5 per
output), with all sections selectable to Low or High frequency shelving response.
Each parametric section can be positioned at a frequency from 20Hz to 20kHz and
features a wide range of 'Qs’ to produce response curves ranging from broad to
notch. The gain control ranges from +15dB to -30dB in 0.1dB steps. Frequency
steps are in 1/36 octave resolution for precise control. Since all filtering is achieved
in DSP, all settings are re-settable with absolute accuracy and in ganged mode
parameters track identically. Very narrow band notch filters (maximum Q of 128)
can be achieved and unlike analogue filters these 'tight' Q filters are entirely stable.
The maximum notch depth is -30dB.
Parametric filters are carefully implemented using Double Precision processing.
This method is costly in terms of processing power but yields substantial benefits in
terms of the TDX2’s exceptional noise performance and greatly improved low
frequency stability.
To adjust parametric settings:
Select relevant channel by pressing the channel ‘GAIN’ button.
Use the ‘BACK’ and ‘NEXT’ keys to select relevant parameter screen.
Use the ‘FREQ’ control to adjust the frequency.
Use the ‘Q’ control to adjust Q.
Use the ‘GAIN’ control to adjust the gain.
(N.B. To show parametric filters in bandwidth (BW) rather than Q, go into the
‘system sub-menu’, select ’filter Q or BW’, select BW.)
OP1+4 Low PEQ: 1 Ο
1K00Hz B=.34 0.0dB