Teac R-3 Radio User Manual


 
7
CAUTION:
<
Switch off the power before making any
connections.
<
Read the instructions of each
component you intend to use with this
unit.
<
Be sure to insert each plug securely. To
prevent hum and noise, do not bundle
the connection cords.
AUX IN jack
You can connect a portable audio player
to this jack.
Connect the LINE OUT or PHONES jack
(audio output jack) of the player using
the supplied stereo mini plug cable.
When using the PHONES jack of your
mini player, you must adjust the volume
of the mini-player or you may hear no
sound from your R-3.
<
Turning the volume of the mini player
up too high may cause the sound from
your R-3 to be distorted. If this is the
case, reduce the volume of the mini
player until the distortion stops and then
adjust the volume level of the R-3 to a
comfortable listening level
Telescopic Antenna
Stretch the telescopic antenna to it's
fullest length and rotate it to the
direction that gives the best reception.
B
A
MAIN POWER switch
Use this button to turn the unit on or
off.
Turn this switch OFF when you don’t use
the unit to save the battery power.
<
Even when the unit is off, you can
recharge the battery.
Headphone jack
For private listening, insert the
headphone plug into this jack, and
adjust the volume using the VOLUME
knob.
<
You can listen to stereo source in stereo
using headphones.
DC IN 12V
Connect the provided AC adaptor to
this jack. Then connect the AC adaptor’s
plug to the AC wall socket.
<
Do not use any AC adaptors other than
the one included with this unit to avoid
fire, electric shock, etc. Be sure to
connect the adaptor to an AC outlet
that supplies the correct voltage.
E
D
The equipment draws a nominal
amount of power from the AC outlet
even with its MAIN POWER switch in
the ON position.
C