Teac R-3 Radio User Manual


 
11
Listening through headphones
Insert the headphones plug into the
phones jack ( ), and adjust the volume.
The sound from the speaker will be cut
off.
When a stereo broadcast is received, you
can listen to stereo sound by connecting
your stereo headphones to this jack.
Also you can listen to stereo sound from
an external source that is connected to
the AUX IN jack.
<
Both stereo and monaural phones can be
used with this jack.
CAUTION
Always lower the volume level prior to
plugging in your headphones. TO AVOID
DAMAGING YOUR HEARING - Do not
place your headphones on your head until
after you have plugged them in.
E
If you want to initialize the
setting:
In DAB mode:
1. Press and hold the INFO/MODE button for
longer than 2 seconds and then press
once more the INFO/MODE button to
display ‘System Reset’.
2. Press the ENTER button.
In FM mode:
1. Press and hold the INFO/MODE button for
longer than 2 seconds to display ‘System
Reset’.
2. Press the ENTER button.
<
Preset stations and the volume level will
be reset to the factory default settings.
Any alarm setting will be erased.
System Resetting