Teac R-3 Radio User Manual


 
23
Turn the MULTI JOG knob to select
RADIO or BUZZ and then press the
ENTER button.
When the current source is AUX, select
AUX or BUZZ.
RADIO: DAB or FM (selected source)
AUX: AUX
BUZZ: buzzer
< If no DAB staion is available but you have
selectted ‘RADIO’ in DAB mode, the timer
will start the buzzer instead of DAB radio.
5
Press the ENTER button to complete
the timer setting.
‘’ appears on the display
.
The unit will turn on at the specified time
every day and after 60 minutes the unit
turns off.
For the timer to start the radio, tune in a
station and adjust the volume before
turning the unit off.
For the timer to start the buzzer, adjust
the volome before turning the unit off.
For the timer to start an external source,
connect it and prepare for the timer
playback.
Don’t forget to turn the unit standby,
or the timer won’t work.
<
When the unit is turned on by the timer,
‘’ blinks on the display
.
<
If the unit is disconnected from the power
supply and the batteries have been
completely discharged for about an hour,
clock and timer settings will be lost.
6