Filter
Top Products
Installing the Driver Without a Floppy Drive
TEAC PortaCD-RW Drive User’s Manual 19
8. Click the Finish button to complete the installation.
The system displays an icon in the My Computer folder and in the Device
Manager
.
You can access the Device Manager by using the following menu sequence:
Start>Settings>Control Panel>System>Hardware>Device Manager (see
Figure 19).
The system now recognizes the drive as a CD-ROM drive.
Figure 19. Device Manager
9. Before you can record to CD-R and CD-RW discs, you must first install
the Easy CD Creator Pre-Mastering software.
For software installation instructions, see “Chapter 4. Installing and Using
Easy CD Creator 5 Basic on Windows Systems” on page 33.
Installing the Driver Without a Floppy Drive
If you do not have a floppy disk drive installed on your IBM PC compatible
system, but you have access to the Internet via the same system, you can download
the drivers from the TEAC website and save them on your hard disk. You can then
install the drivers from the hard disk.
Download the appropriate drivers and installation instructions from the TEAC
website at:
http://www.teac.com/dspd
PortaCDRW.book Page 19 Wednesday, April 4, 2001 10:49 PM