31
ENGLISH
Specifications
AMPLIFIER Section
Output Power .....................40 W/ch (6 ohms, 0.5 %,1 kHz)
Input Sensitivity ...........................PHONO: 2.5 mV 47 kΩ
AUX, CD, TUNER: 200 mV 47 kΩ
Frequency Response ...............20 Hz to 60,000 Hz (+1/–3 dB)
TUNER Section
FM Section
Tuning Range ..........................87.50 MHz to 108.00 MHz
Signal-to-Noise Ratio ..............................65 dB (Mono)
60 dB (Stereo)
AM Section
Tuning Range ...............................522 kHz to 1,629 kHz
Signal-to-Noise Ratio ......................................35 dB
USB Section
Playback
Frequency Response ..................20 Hz to 20,000 Hz (±2 dB)
Signal-to-Noise Ratio ............................more than 85 dB
Recording
Frequency Response ..................20 Hz to 15,000 Hz (±2 dB)
Signal-to-Noise Ratio ............................more than 85 dB
GENERAL
Power Requirements .............................230 V AC, 50 Hz
Power Consumption .......................................85 W
0.5 W (standby)
Dimension (W x H x D) .......................215 x 110 x 315 mm
Weight ...................................................4.4 kg
Standard Accessories
Remote Control Unit (RC-1225) x 1
Batteries (AAA) x 2
AM Loop Antenna x 1
FM Lead-type Antenna x 1
Owner’s Manual x 1
Warranty Card x 1
< Design and specifications are subject to change without notice.
< Weight and dimensions are approximate.
< Illustrations may differ slightly from production models.
“No song title No artist No album” appears on the display.
e There is no ID3 tag information for the music file.
Edit the song title, artist, and album information of the song on
a PC using the MP3 or WMA making application.
Some unknown characters are displayed on the display
panel.
e This unit cannot display symbols and full-size or double-byte
characters (such as Japanese, Chinese, etc.) correctly. File name
of MP3 or WMA should be alphanumeric characters.
If normal operation cannot be recovered, unplug the power
cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any fluid
completely. Do not use thinner, benzine or alcohol as they may
damage the surface of the unit.