Teac AG-H380 Stereo Receiver User Manual


 
13
ENGLISH
A
B C
A
How to turn the unit on or off
Press the POWER switch to turn the unit on or off.
When you use the system control function, set this switch on,
and turn the system on/standby using the remote control unit.
Standby/On indicator
The Standby/On indicator turns blue when the unit is turned on.
< When you turn on the system, the source that was selected last
time will start playback automatically.
< The clock setting will not be saved whern the POWER turns off.
B
How to select source
Every time the SOURCE button is pressed, the mode is changed
as follows:
TUNER USB/iPod PHONO
CD AUX2 AUX1
Or press the TUNER, USB/iPod, PHONO, AUX 1/2 or CD button on
the remote control unit to select the source directly.
C
Adjust the volume
To protect speakers from a sudden high-level signal, gradually
turn up the volume to the required level with the VOLUME knob.
D
Muting
To cut the sound temporarily, press the MUTING button. To
cancel muting, press the MUTING button again or change the
volume setting.
E
Dimmer
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.
< This function will be cancelled when the unit is turned off.
F
Listening through headphones
Insert the headphone plug into the PHONES jack, and adjust the
volume. The sound from speakers and subwoofer will be cut off.
Basic Operation (1)