Filter
Top Products
BASIC OPERATION
PLAYING VIDEO SOURCES
1. Select DVD, VIDEO1, VIDEO 2 by pressing the corresponding button.
2. Play the sound source corresponding to the source selected (for example, if you have selected DVD, press
PLAY on your DVD player).
3. The picture from the video source will be transmitted to the TV and the sound from the video source will be
heard from the speakers.
THE RADIO OPERATIONS
Automatic Tuning
1. Press the POWER button, then press the TUNER button to turn ON this unit.
2. Select TUNER mode by pressing the TUNER button.
3. Select the appropriate frequency band (FM or MW) by pressing the TUNER button again.
3. Press the AUTO/MANUAL button on the remote to activate automatic selection. (Note: default mode is
Manual selection) "Auto" now appears on the display.
4. Press the TUNING +/- on the remote to select the station you want to listen to. When a station is tuned in,
the tuning process will stop automatically. (Automatic station selection)
5. Press TUNING +/- on the remote again to select another channel.
MANUAL TUNING
Use this function for selecting stations which cannot be tuned automatically due to a weak signal
To tune a channel manually:
Skip step 4 in the above procedures. Each time the TUNING +/- button is pressed momentarily (0.5 second or
less), the frequency changes by a fixed increment (FM: 50 kHz increments, MW: 9 kHz increments).
FM Modes Available:
Press the STEREO button to alternate between Stereo mode and Mono mode.
Stereo: FM stereo broadcasts are received in stereo and the “∞” indicator lights on the display.
Mono: Use to compensate for weak FM stereo reception. Reception will now be forced to monaural, reducing
unwanted noise.
PRESET TUNING
This facility is used to store FM and MW stations from channels 1 to 15 respectively.
Automatic Memory Presetting:
1. Select TUNER mode by pressing the TUNER button.
2. Select MW or FM by pressing the TUNER button again.
3. Press the APS button.
The 15 best-reception stations in your area will be automatically stored.
Manual Memory Presetting
1. Select TUNER mode by pressing the TUNER button.
2. Select MW or FM by pressing the TUNER button again.
3. Press the TUNING +/- button on the remote to select a station you want to preset.
4. Press the MEMORY on the remote button briefly.
5. While the “MEM” indicator is lit, press TUNING +/- button to select a preset station. The station number will
be displayed on the screen.
6. Press the MEMORY button again.
To store more stations, repeat steps 3 to 6.
How to select preset stations
Ensure you are in TUNER mode and press the STATION button to select a preset radio station.
16