Filter
Top Products
REMOTE CONTROL UNIT
By using the provided remote control unit, this unit
can be controlled from your listening position. To use
the remote control unit, point it at the REMOTE
SENSOR window of this unit.
Notes:
- Even if the remote control unit is operated within
the effective range, remote control operation may be
impossible if there are any obstacles between the
unit and the remote control.
- If the remote control unit is operated near other
appliance which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly.
- The power is turned on/off (standby) by pressing
the POWER button on the remote control unit in
standby mode.
Precautions concerning batteries
- Be sure to insert the batteries with correct positive+
and negative – polarities.
- Use batteries of the same type. Never use different
types of batteries together.
- Rechargeable and non-rechargeable batteries can
be used. Refer to the precautions on their labels.
- When the remote control unit is not to be used for a
long time (more than a month), remove the batteries
from the remote control unit to prevent them from
leaking. If they leak, wipe away the liquid inside the
battery compartment and replace the batteries with
new ones.
- Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
BATTERY INSTALLATION
1. Remove the battery compartment cover.
2. Insert two “AAA” dry batteries. Make sure that
the batteries are inserted with their positive “+”
and negative “-” poles positioned correctly.
3. Close the cover until it clicks.
If the distance required between the remote
control unit and main unit decreases, the
batteries are exhausted. In this case, replace the
batteries with new ones.
10