Filter
Top Products
User's Manual
34
CHAPTER 4
INPUTS P2
TUNER
TUNER PRESETS
TAPE
PHONO
8-CHANNEL
8-CH INPUT CONFIGURE
NAME 8-CHANNEL
GAIN TRIM 0 dB
LOCK TO VID VID1
MAIN ZONE ENABLE
TRIGGER RELAY ON
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS
Input Menus
These menus let you select which
input you would like to conÞ gure.
Pressing the joystick right on each
input brings up a second menu which
allows you to conÞ gure what happens
when each input is selected.
Input Menus
INPUTS
DVD
CD
SAT
VID1
VID2
VCR
Input ConÞ guration Menus
Name
Use the joystick up/down, and left/
right to change the display name
for any input, up to 9 characters.
Move fully left when Þ nished.
Gain Trim
Use this to adjust all of your
sources to play at similar levels. To
prevent overloading, the levels can
only be adjusted downwards.
Default Mode
Set the input to a favorite surround
mode, or the last mode, or stereo.
Video Type
If you know the type of video used
for each input, select the type from
CVID (composite), SVID (S-video)
or COMP (component). Otherwise,
choose AUTO, and the Receiver
will automatically detect the source
type when a video signal is pres-
ent. There maybe some delay in
Auto, for certain program material.
Main Zone
Enable/disable the selected input
in the Main Zone. You can disable
any unused inputs then they will
not play in the Main Zone.
Full Auto
Select on, and the Receiver will
turn on and select this input when-
ever this input starts to play. Select
off for any input which hinders full-
auto operation.
Trigger Relay
The Trigger Relay can be set to
turn on whenever the input is se-
lected. This could be used to turn
on an ampliÞ er or a video screen
for example.
Zone 2
Enable/disable the input in Zone 2.
You can select the inputs you wish
to play in Zone 2. For example,
you might disable the Phono input
if nobody in Zone 2 appreciates
your vintage collection of 78s.
Note: The 8-Channel input menu is
slightly different from the other
menus:
It allows you to select a speciÞ c
video input whenever the 8-Chan-
nel audio input is selected. Also,
this input only works in the Main
Zone, not Zone 2.
DVD INPUT CONFIGURE
NAME DVD
GAIN TRIM 0.5 dB
DEFAULT MODE LAST
VIDEO TYPE AUTO
MAIN ZONE ENABLE
FULL AUTO ON
TRIGGER RELAY ON
ZONE 2 ENABLE