Filter
Top Products
User's Manual
15
Auto-Off
The amplier will automatically turn to
standby mode if no audio is present for
an amount of time set using this menu.
The amplier will turn back on whenever
an audio signal is present again. The
available time settings are 5, 10, 15, 20,
25, and 30 minutes, and "Disabled." If
"Disabled" is selected, then the amplier
will not turn itself off.
Time
Decrease
Time
Increase
Time
SUB/LFE Mode
In SUB Mode, the Crossover Slope and
Crossover Frequency can be adjusted,
and so these menus are available.
In LFE mode, the Crossover Slope
and Crossover Frequency cannot be ad-
justed, and so these menus are hidden.
The crossover adjustment is then left to
the Home Theater preamplier.
Select
SUB or LFE
Auto-Off
The amplier will automatically turn
on from standby if a trigger voltage is
applied to the 12VDC trigger input on the
rear panel. This menu allows you to turn
this feature on or off.
ON or OFF
Select
Lock Setting
This menu allows you to lock the DSP
settings so that they cannot be altered.
If lock is enabled then no settings can
be changed until lock is disabled.
Disable or
Enable
Select