Filter
Top Products
67
Additional Information
The disc tray does not open and “LOCKED”
appears on the front panel display.
, Child Lock is set (page 26).
The disc tray does not open and “TRAY
LOCKED” appears on the front panel
display.
, Contact your Sony dealer or local
authorized Sony service facility.
“Data error” appears on the TV screen
when playing a DATA CD or DATA DVD.
, The MP3 audio track/JPEG image file/
DivX video file you want to play is broken.
, The data is not MPEG-1 Audio Layer III
data.
, The JPEG image file format does not
conform to DCF (page 46).
, The JPEG image file has the extension
“.JPG” or “.JPEG,” but is not in JPEG
format.
, The file you want to play has the extension
“.AVI” or “.DIVX,” but is not in DivX
format, or is in DivX format but does not
conform to a DivX Certified profile.
The CONTROL FOR HDMI function does
not work.
, When HDMI indicator does not light up on
the front panel, check the HDMI connection
(page 15).
, Set the “CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 63).
, Make sure that the connected component is
compatible with the CONTROL FOR
HDMI function. Please refer to the
operating instructions of the component for
detailed explanation.
, If you change the HDMI connection,
connect and disconnect the AC power cord
(mains lead), or if a power failure occurs,
turn on all components connected to HDMI,
and set “CONTROL FOR HDMI” setting in
“HDMI SETUP” to “OFF,” then set the
“CONTROL FOR HDMI” setting in
“HDMI SETUP” to “ON” (page 63).
‘BRAVIA Sync’ display does not appear.
, Turn off any display of the DVD player
displays. Then, try again.
, Please return to the one screen mode if your
TV is in two screen mode. Then, try again.
Display language on the screen switches
automatically.
, When “LANGUAGE FOLLOW” is set to
“ON” in the “HDMI SETUP” (page 63), the
display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
The DVD player turns on automatically.
, HDMI input is selected using TV Interface.
Some TV has this function for CONTROL
FOR HDMI.
, “CONTROL FOR HDMI” in “HDMI
SETUP” is set to “ON” (page 63).