Filter
Top Products
23
Hookups
8 Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
9 Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 58)
◆ S video signals
• S VIDEO (page 58)
◆ RGB signals
• RGB (COMPONENT OFF) (page 58)
10Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component such as an amplifier
(receiver) appears.
11Press X/x to select the type of
jack (if any) you are using to
connect to an audio component,
then press ENTER.
If you did not connect an audio
component, select “NO,” then go to step
15.
If you connected an audio component
using just an audio cord, select “YES:
LINE OUTPUT L/R (AUDIO),” then go
to step 15.
If you connected an audio component
using either digital coaxial cord/HDMI
cord, select “YES: DIGITAL OUTPUT.”
12Press X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
13Press ENTER.
“DTS” is selected.
14Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
If your audio component has a DTS
decoder, select “ON.” Otherwise, select
“OFF.”
15Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set “MPEG” to “MPEG”
(page 61).
Note
When “PhotoTV HD” mode is activated (page 50),
the selection for “TV TYPE” is skipped.
SCREEN SETUP
TV TYPE:
BACKGROUND:
SCREEN SAVER:
LINE:
16:9
ON
JACKET PICTURE
PROGRESSIVE
(COMPONENT OUT ONLY)
:
MODE (PROGRESSIVE):
4:3 OUTPUT:
RGB (COMPONENT OFF)
VIDEO
S VIDEO
VIDEO
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
YES
NO
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
48kHz/96kHz PCM:
DTS:
MPEG:
PCM
ON
OFF
D-PCM
OFF