Filter
Top Products
1
OVERVI EW
This unit uses Bluetooth technology that allows wireless communications on devices such as cellular
phones. This is designed to be a totally wireless hands-free car kit or a stand-alone wireless headset.
This provides the user to operate a cellular phone inside the car while driving and can also be used
anywhere by detaching the earpiece and becomes a stand-alone Bluetooth headset. The unit will work
on all Bluetooth cellular phones provided that they respect the Bluetooth protocol.
A. I LLUSTRATI ONS
1 – Magnet
2 – Charging Pins
3 – Charge/Power Indicator
4 – Line Pick-up Button
5 – Cigarette Lighter Plug
6 – Main Speaker
7 – Ear Hook
8 – Multi-function Button (Talk/Power/Volume)
9 – Microphone / Indicator lights
10 – Speaker Volume
11 – Earphone
B. TURNI NG ON/ OFF THE UNI T
There are two ways to turn ON/OFF the unit depending on how it is being used. When used as a
hands-free car kit, plugging it in the cigarette lighter plug (5) activates the unit. When used as
headset, follow the steps below:
1. Press the multi-function button for 2 seconds. A low-high tone will then be heard and a blue
light will show.
2. Release the button and the indicator light will blink. The headset is now ready and is waiting
for a call (standby mode). (Note: If the indicator becomes red, it means that the battery on the
headset is low. Re-charge it immediately by putting it back to the main unit.)
3. Turn the headset OFF by pressing the multi-function button for more than 4 seconds or more
depending on the phone. A high-low tone will then be heard and the indicator light becomes
red then turns off after a few seconds.
4. Wait at least 4 seconds before turning the headset ON again.
REMARK:
When the cell phone is not detected for more than 5 minutes, if used as a stand-alone headset or
docked and no power from the Cigarette lighter plug, it will turn off automatically to conserve
battery life.