Filter
Top Products
10
d. MAKING A CALL with the headset on
Normal dialing
1. Enter the contact number and press OK. Sound is automatically transferred to the
headset.
2. Press the multi-function button to hang-up and terminate the call.
Voice dialing
Refer to step f and g for the procedure when activating and recording for voice dialing.
1. Press the multi-function button once to activate the voice dialing. Sound is
automatically transferred to the headset.
2. A beep will then be heard on the headset prompting the user to say the name of the
person to call.
3. Say the name. The name will be played back to you. The phone will then place the call
automatically. In case the cell phone does not recognize the name spoken, the steps
above may be repeated.
4. Press the button again to terminate the call.
e. SETTING THE VOLUME
The headset has a digital volume control and is combined with the multi-function button. Setting
the volume can be done during calls only.
1. Press it clockwise to increase the volume.
2. Decreases the volume by pressing it counter-clockwise.
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too
high, it can cause feedback (whistling sound), echo or background noise during calls on some cell
phones.
f. ACTIVATING THE VOICE DIALING
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the
name dialing function and record your voice. To turn voice dialing on:
1. On the Applications window (flip open mode), tap Phone.
2. Tap Edit then tap Preferences. A list of features will appear.
3. Tap Voice Control then tap the box aligned to Voice dialing to check and activate the voice
dialing feature. Tap the box aligned to Play caller name so that the name will be played back
to you.
4. Tap Done on the on screen button when finished.
5. On the Preferences mode, tap Done again.
6. Tap to exit and return to the Applications mode.
g. RECORDING FOR VOICE DIALING
The voice dialing feature is only applicable to contacts saved to phone memory.
1. On the Applications window (flip open mode), tap Contacts.
2. Tap the contact where you want to add a voice dialing feature. Tap Edit. Scroll to Edit
Contact. Tap on the on-screen buttons.
3. Tap Record. Speak after tone will be displayed on the screen.
4. Record your voice. To check if your recording is of good quality, tap Play. If not, tap Record
again. Press Done when finished.
5. Tap to make another record and repeat the steps above. To return to the Applications
window, tap button.
Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.
USING WITH SONY ERICSSON T610
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone
and other Bluetooth devices.
1. Go the Menu Key by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,
SELECT. Turn On, SELECT.
2. Continue pressing , to exit.
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the car kit.
2. Detach the headset from the holster/base.
3. Turn off the headset.
4. From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-
tone sound will be heard and at the same time the red and blue indicator will alternately blink.
This indicates that the unit is now ready for pairing.