Filter
Top Products
12
USING WITH NOKIA 6310/6310i
a. ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone
and other Bluetooth devices.
1. Press the Menu button. Scroll to Bluetooth, SELECT. Press SELECT again.
2. Choose On, SELECT. An icon will appear on the upper left corner.
3. Press Back then Exit to exit the Menu.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Bluetooth Select On Select
6310 10 1 1 1
6310i 11 1 1 1
b. PAIRING TO THE CELLULAR PHONE
1. Bring the cellular phone at about 20 cm from the headset.
2. Detach the headset from the holster/base.
3. Turn off the headset.
4. From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-
tone sound will be heard and at the same time the red and blue indicator will alternately blink.
This indicates that the headset is now ready for pairing.
5. Press the Menu button. Scroll to Bluetooth, SELECT. Scroll to Search for audio accessories,
SELECT. The phone is now scanning for Bluetooth devices. SELECT the headset. The
phone will initiate connection with the headset.
QUICK ACCESS (for step 5):
Press Menu followed by the sequence of numbers below.
Bluetooth Search for audio accessories
6310 10 2
6310i 11 2
6. Enter “0000” as the passcode then press OK. The phone is now connected with the headset.
7. Press Back then Exit to exit the Menu.
The headset is paired and ready to use. An icon will be displayed during the standby mode
indicating that the headset is linked with the phone.
Note: Once paired, the headset and the phone have simultaneous connection with each other
(keypad tones can be heard on the headset every time the keypad is pressed).
c. AUTO ACCEPT MODE
The auto accept mode allows the Bluetooth function to be turned on automatically whenever the
user starts sending information such as answering or making a call via the Bluetooth headset.
1. Press the Menu button. Scroll to Bluetooth, SELECT. Scroll to View paired
devices, SELECT.
2. Select the headset and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No,
SELECT.
3. Continue pressing Back button to exit the Menu.
QUICK ACCESS:
Press Menu followed by the sequence of numbers below.
Bluetooth View paired devices Select
6310 10 4 Options
6310i 11 4 Options
d. ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the headset as well as on the
phone.
1. Press the multi-function button down once to answer the call.
2. End the call by pressing the button again.
Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the
headset.
e. MAKING A CALL with the headset on
Normal dialing
1. Enter the contact number and send. As you dial, audio and the keypad tones can be
heard on the headset simultaneously but not on the phone.