Filter
Top Products
24
GB
When playing a hybrid disc with a Super Audio
CD layer and a CD layer (page 8), the player
plays the Super Audio CD layer automatically.
You can select the CD layer.
Press SA-CD/CD in stop mode.
“SA-CD” on the display turns to “CD,” and the
CD layer is selected to be played back.
If you press SA-CD/CD again, the Super Audio
CD layer is selected.
If you change a disc, the selected playback layer
is cleared.
Tip
Since both layers are on one side, it is not
necessary to turn the disc over.
When playing a disc with the 2-channel
playback area and the multi-channel playback
area (page 8), you can select the playback area
you want to listen to.
You can select the playback area in HDMI ON
mode only (page 15).
Press MULTI/2CH in stop mode.
When the multi-channel playback area is
selected, “MULTI” appears on the display.
When the 2-channel playback area is selected,
“MULTI” disappears.
To play a multi-channel Super
Audio CD
Connect the player to a multi-channel amplifier
via the HDMI OUT jack.
Set the balance and distance of the speakers on
the connected amplifier.
Note
The playback area selected by this operation is valid
only for the current disc.
Selecting the Playback
Layer
SA-CD/CD
SA-CD/CD
Selecting the Playback
Area of a Super Audio CD
MULTI/2CH
MULTI/2CH