Sony XA5400ES Stereo System User Manual


 
12
GB
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the player, replace both batteries with new ones.
Notes
Do not leave the remote in an extremely hot or a
humid place.
Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
Do not use a new battery with an old one.
Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a
malfunction.
If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
When you connect a stereo amplifier or make an
analog connection with an MD deck, connect the
player and the component through the
ANALOG OUT UNBALANCED jacks or
ANALOG OUT BALANCED jacks.
Use the audio connecting cord (supplied) or
XLR (balanced) cables (not supplied) for this
connection.
Be sure to turn off the power of all components
before making connections, and connect plugs
securely to prevent noise.
Connecting a component with
analog input jacks
Use the supplied audio connecting cord. Be sure
to match the color-coded pin to the appropriate
jacks: white (left) to white and red (right) to red.
Audio connecting cord (supplied)
Hooking Up the Analog
Audio Components
White (L)
Red (R)
To CD (Super Audio CD) or analog input
jacks (L/R) on a stereo amplifier, MD deck,
etc.