Filter
Top Products
10
GB
Rear Panel
A IR REMOTE IN jack
Equipped on the models for the U.S. and Canada
only.
Connects an IR repeater.
B ANALOG OUT BALANCED L/R jacks (13)
Connects a component with XLR input jacks, such
as stereo amplifiers, etc., using an XLR (balanced)
cable (not supplied).
C HDMI PRIORITY MULTI/2CH switch (18)
When both multi-channel area and 2-channel area
are recorded on a Super Audio CD layer, sets the
area that is given priority to be played back.
D HDMI OUT jack (13)
Connects components with HDMI jacks, such as
HDMI-compliant amplifiers, etc.
E DIGITAL OUT (CD) COAXIAL jack (14)
Connects a component with the coaxial digital
input jack, such an MD deck, etc.
F DIGITAL OUT (CD) OPTICAL jack (14)
Connects a component with the optical digital
input jack, such an MD deck, etc.
G DIGITAL OUT (CD) ON/OFF switch (16)
Sets whether audio signals are output from the
DIGITAL OUT (CD) jacks or not.
H AC IN jack (14)
Connects the supplied AC power cord (mains
lead).
I ANALOG OUT UNBALANCED L/R jacks
(12)
Connects a component with analog input jacks,
such as stereo amplifiers, etc., using an audio
connecting cord.
About the IR REMOTE jack
You can operate the player without pointing the
remote toward the remote sensor of the player if
you connect an IR repeater (not supplied) to the
IR REMOTE jack.
Use an IR repeater when you install the player in
a place where signals from the remote cannot
reach.
IR repeater
(not supplied)
SCD-XA5400ES
RM-ASU042