Filter
Top Products
59
GB
D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB08ADV_STR-DH520-
U2.fm
masterpage: Right
STR-DH520
4-263-361-11(1)
Advanced Operations
You can adjust the tonal quality (bass/treble
level) of the front speakers.
x BASS
x TREBLE
Note
This function does not work when “A. DIRECT” is
selected.
You can set the FM station receiving mode and
name the preset stations.
x FM MODE
•STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN
Lets you set the name of preset stations. For
details, see “Naming preset stations”
(page 42).
You can adjust settings for the audio to suit
your preference.
x A/V SYNC
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• SYNC ON (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• SYNC OFF (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work when “A. DIRECT” is
selected.
•The delay time may vary depending on audio
format, sound field, speaker pattern and speaker
distance settings.
x DUAL
Lets you select the language you want to listen
to during digital broadcast when available.
This feature only functions for Dolby Digital
sources.
• MAIN/SUB
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
•MAIN
Sound of the main language will be output.
•SUB
Sound of the sub language will be output.
x A. ASSIGN
Lets you reassign the DIGITAL audio input
jack to other input source. For details, see
“Using the sound/images from other inputs”
(page 51).
x NIGHT M.
Lets you retain a theater-like environment at
low volume levels (page 13).
•NIGHT. ON
•NIGHT.OFF
x V. ASSIGN
Lets you reassign the COMPONENT VIDEO
input jack to other input source. For details,
see “Using the sound/images from other
inputs” (page 51).
EQ menu
TUNER menu
AUDIO menu
VIDEO menu