Filter
Top Products
21
GB
C:\Documents and Settings\pc13\Desktop\Revision1_STR-
DG700\JC060000_2680065112DG700_GB\2680065111\GB03CON_STR-DG700-CEL.fm
masterpage: Right
STR-DG700
2-680-065-11 (2)
Getting Started
Notes
•Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
Video signals can be output as S-video signals
or component video signals and this
upconverted video signals can only be output
from the S-video or component video
MONITOR OUT jack.
S-video signals can also be output as
component video signals and this upconverted
video signals can only be output from the
component video MONITOR OUT jack.
Note on converting video signals
When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the video
signal output, the image on the TV screen may
appear distorted horizontally or no image may
be output.
Reassigning video input signals
to another input
Component video input signals can be
reassigned to another input (page 65). You can
also reassign the HDMI input to another input
(page 66).
TV monitor etc., INPUT jack
Receiver MONITOR OUT jack
Receiver INPUT jack
Video component OUTPUT jack
Signal
processing
High quality image
COMPONENT
VIDEO S-VIDEO VIDEO
COMPONENT
VIDEO S-VIDEO VIDEO
COMPONENT
VIDEO S-VIDEO VIDEO
COMPONENT
VIDEO S-VIDEO VIDEO
HDMI
HDMI
HDMI
HDMI
GB01COV_STR-DG700-CEL.book Page 21 Thursday, March 16, 2006 11:51 AM