Filter
Top Products
masterpage:Left
lename[C:\Documents and
S
ettings\pc13\Desktop\JC060000_4253437131DE197_GB\4253437131\GB06REM_STR-
D
E197-CEL.fm]
model name1[STR-DE197]
[4-253-437-13(1)]
22
GB
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a tape deck and
you do not have an MD deck, you can assign the
MD/TAPE button to your tape deck.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the input button whose input
you want to change (for example, MD/
TAPE).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 4 – Tape deck).
The following buttons are assigned to select
the input:
*Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the input buttons to
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the
same time.
Changing the factory
setting of an input button
To operate Press
CD player 1
DAT deck 2
MD deck 3
Tape deck A 4
Tape deck B 5
LD player 6
VCR (command mode VTR 1*) 7
VCR (command mode VTR 2*) 8
VCR (command mode VTR 3*) 9
TV 0
DSS (Digital Satellite Receiver) >10
DVD player ENTER
VCD player .
GB01COV_STR-DE197-CEL.book Page 22 Thursday, May 25, 2006 9:37 AM