Filter
Top Products
masterpage:Left
lename[C:\Documents and
S
ettings\pc13\Desktop\JC060000_4253437131DE197_GB\4253437131\GB050TH_STR-
D
E197-CEL.fm]
model name1[STR-DE197]
[4-253-437-13(1)]
18
GB
Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD
player.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4 Start recording on the recording deck,
then start playback on the playback
component.
Note
Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
Recording on a video tape
You can record from a VCR or a TV using the
receiver. You can also add audio from a variety
of audio sources when editing a video tape. See
the operating instructions of your VCR if you
need help.
1 Select the program source to be
recorded.
2 Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
3 Insert a blank video tape into the VCR
(VIDEO 1) for recording.
4 Start recording on the recording VCR,
then start playing the video tape you
want to record.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape. Locate
the point where you want to start recording from
another audio source, select the program source, then
start playback. The audio from that source will be
recorded onto the audio track of the video tape instead
of the audio from the original medium. To resume
audio recording from the original medium, select the
video source again.
Recording
GB01COV_STR-DE197-CEL.book Page 18 Thursday, May 25, 2006 9:37 AM