Filter
Top Products
107
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Adjusting Settings
To check the software version
1
Select “Software Update”, then press
.
2 Select “Version”, then press .
The software version appears on the TV
screen.
Bluetooth Settings
You can adjust the settings for the Bluetooth.
x Pairing
Lets you pair the Bluetooth device with the
receiver.
x BT Standby (Bluetooth Standby)
While the “BT Standby” mode is set to “ON”,
the receiver can be controlled by the Bluetooth
device even when the receiver is in standby
mode.
1 Select “BT Standby”, then press .
2 Select “ON” or “OFF”, then press .
• ON: The receiver turns on automatically
when the Bluetooth device is connected
to the receiver.
• OFF: The receiver does not turns on.
Note
You can only select this parameter when a Bluetooth
device is paired.
x Clear History
Lets you clear all paired Bluetooth device and
connection information from the receiver.
1 Select “Clear History”, then press .
“Clear all history?” appears on the TV
screen.
2 Press B/b to select “OK”, then press
.
“Complete!” appears, and all history is
deleted.
Note
You cannot clear the history in the following cases.
– No paired Bluetooth devices in history.
– When you perform a pairing operation.
x Address Info
Lets you check the Bluetooth device address
information. You can check the address
information when a Bluetooth device is
connected.
System Settings
You can adjust the settings of the receiver.
x 12V Trigger
Lets you select various options for use of the
12V Trigger function.
• OFF: Turns off output of 12V trigger even
when the main receiver is turned on.
• CTRL: Turns the output of 12V trigger on
or off manually using the control command
of an external control device.
• ZONE: Turns the output of 12V trigger on
or off based on whether the main zone is
turned on or off.
• INPUT (for “Main” only): Turns on the
output of 12V trigger when the preset input
is selected.
When you select “Input”, the setting display
which sets each input trigger to on/off
appears. Press V/v to select the input, then
press to select on or off.
• HDMI A (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT A jack.
• HDMI B (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT B jack.
x RS232C Ctrl
Lets you turn the control mode for
maintenance and service on or off.
•ON
•OFF
continued