Filter
Top Products
30
GB
A SLEEP: Lights up when sleep timer is
activated.
B SPA/SPB: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
C ; DIGITAL (EX): Lights up when the
receiver is decoding signals recorded in the
Dolby Digital format.
D ; PRO LOGIC (II): Lights up when the
receiver applies Pro Logic processing to 2
channel signals in order to output the center
and surround channel signals. This indicator
also lights when the Pro Logic II movie/music
decoder is activated. However, this indicator
does not light if both the center and surround
speakers are set to “NO”.
E DTS (-ES): Lights up when DTS signals are
input.
F NEO:6: Lights up when DTS Neo:6 cinema/
music mode decoding is activated.
G DIRECT: Lights up when the ANALOG
DIRECT function is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 25–28 for tuner operations.
I EQ: Lights up when the equalizer is activated.
J D.RANGE: Lights up when dynamic range
compression is activated (page 41).
K MULTI CH IN: Lights up when adjusting the
multi channel sub woofer level.
L COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
M OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
N LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
O Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural
or the surround components obtained by
Pro Logic processing)), SB (Surround Back
(the surround back components obtained by
6.1 channel decoding))
Example:
Recording format (Front /Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
P SW: Lights up when sub woofer selection is
set to “YES” (page 20). While this indicator
lights up, the receiver outputs the LFE signal
recorded on the disc or generates a low
frequency signal for output to the sub woofer.
This indicator does not light during the 2CH
STEREO mode.
About the indications in the display
D.RANGE
EQ
RDS
STEREO MONO
DIRECT
MEMORY
DTS-ES
NEO:6
OPT
SL
SW
SB SR
LCR
L F E
DIGITAL
;
PRO LOGIC II
;
COAX MULTI CH IN
EX
SP BSP ASLEEP
2134
7
5 6
qgqh
9
8
qs
0qdqf qa
SL
SW
SR
LCR