Filter
Top Products
20
GB
Additional Information
AM tuner section
Frequency range MW: 522 - 1,611 kHz
(9 kHz step)
LW: 144 - 288 kHz
(1 kHz step: Manual tuning)
(3 kHz step: Automatic tuning)
Sensitivity (with AM loop aerial)
MW: 200 µV/m
LW: 700 µV/m
Signal-to-noise ratio MW: 54 dB
(50 mV/m, 999 kHz)
LW: 50 dB
(50 mV/m, 216 kHz)
Harmonic distortion 0.3%
Selectivity 50 dB
Aerial terminal Push lever
General
Power requirements 230 V,
AC 50/60 Hz
Power consumption 20 W
Dimensions 430 × 97.5 × 374 mm (w/h/d)
Weight 6.2 kg
Remote control capability
IR
Station preset capacity max.99 (DAB, FM and AM total)
Supplied accessories See page 4.
Design and specifications are subject to change without
notice.
Specifications
DAB tuner section
Frequency range 174.928 (5A) - 239.200 (13F) MHz
1452.960 (L1) - 1490.624MHz (L23) MHz
For details, see “DAB frequency table” in
page on page 21.
Sensitivity 6.9 µV/28 dBf
Signal-to-noise ratio 100dB
THD+N 0.005% (1kHz)
Channel separation 90dB (1kHz)
Selectivity 35 dB (at adjacent channel)
Frequency response +0.2/–0.3 dB (5 Hz - 20 kHz)
DA Converter Pulse D/A S-TACT128
Digital Filter VC24 (only for DAB analog output)
Digital output Terminals: Coaxial and Optical
Sampling frequency: 48kHz
RDI output Optical
Aerial terminal 75Ω, F female
FM tuner section
Frequency range 87.5 - 108.0 MHz
Sensitivity at 40kHz derivation
at 26 dB quieting (mono) 0.9 µV/10.3 dBf
at 46 dB quieting (stereo) 23 µV/38.5 dBf
Signal-to-noise ratio at 40 kHz deviation
80 dB (mono), 76 dB (stereo)
THD+N 1kHz, 40kHz deviation
WIDE
0.035% (mono),
0.045% (stereo)
Channel separation 50 dB (1 kHz) WIDE
Selectivity at 400 kHz
WIDE 85 dB
NARROW 90 dB
Frequency response +0.2/–0.3 dB (30 Hz - 15 kHz)
Aerial terminal 75Ω, IEC male